Loading ...

Channel drain with grate - stainless steel trench drain system - stainless steel channel drain and grating for drainage and waste waters

channel drains > Channel drains in stainless steel for industrial use

Channel drain with grate RAY 122

 Channel drain in stainless steel grate channel drain with grating in stainless steel - grate - canalina-griglia image

Product description

Channel drain with anti-slip grate cover entirely made of Aisi 304 stainless steel and designed for draining waste water. A trap to collect foreign matter fitted with a 300x300 drain cover is located at the centre of the channel. The cover is assembled to the channel by means of screwed flages with air-tight gastek for each arm. Suitability for vehicular traffic is guaranteed by the 2 mm thick stainless steel used to manufacture the channel drain and the excellent mechanical performance of the resins used to reinforce the rim. Overall dimensions of the visible surface: 164 mm (220 mm for the part under the floor level); pickled and polished grate: 122 mm; load bearing plate: 20X2; mesh: 25x25; reinforced rim. Maximum depth of the channel drain: 100 mm for arms up to 4 m, 120 mm for arm lenghts between 4 and 12 m, 140 mm for lenghts between 13 and 16 m. Minimum drain gradient: 0,5% (5mm for each metre).

immagini canaline di scarico

Fixing tabs are welded to the outer part (ref.1) every 350 mm for perfect anchoring to the ground. The slit comes with reinforcing stainless steel rods placed every 1000 mm. The stainless steel plate is 2 mm thick and can be used also to lock the grate.

Catch basins (ref. 2) feature an outlet for connection to the channel drain arm. They are entirely made of Aisi 304 stainless steel and are designed for draining waste water. They are equipped with a strainer (with a trap in the fitting with vertical drainpipe) with 8 mm holes to collect foreign matter and an extractible trapped pipe or easier cleaning of the drain (supplied as an optional in the fitting with side drainpipe). The catch basin consists of a 2 mm thick vessel inclined towards the drain pipe to prevent accumulation of small sediments. It is welded to a 6 mm thick flange which makes the product suitable for vehicular traffic . The visible square surface contains a perforated round cap with Ray pattern (reinforced on request) designed for faster draining and compliance with the safety legislation in force.

Dimensional features:
• Length: from 1 to 16 m per arm
• Channel drain width: 164 mm (visible)
• Grate width: 122 mm
• Channel drain gradient: 0.5%
• Max. length of building modules: 4.00 m.
• Reinforcing rod with grate lock: every linear metre
• Distance between fastening clamps: 350 mm
• Heel proof and anti-slip grate

 Channel drain in stainless steel grate channel drain with grating in stainless steel - grate - canalina-griglia disegno

Channel drains in stainless steel for industrial use

At your disposal for any information

For further requests about Ray Inox technologies, fill and send the form below. 
Your data will be used only to answer to your request.  

* Required field
Select the field of use and the product you are interested in, we will answer to your request as precisely as possible.
Industrial use:
Food industry
Pharmaceutical industry
Chemical industry
Outdoor area with vehicular traffic
Other industrial
Residential use:
Locker room
Swimming pool
Outdoor space for pedestrian use
Other residential
Product interest:
RAY 12
RAY 122
RAY 17
Floor drain
Floor drain with grate
Stamping floor drain
Catch basins
Otherwise call us at +39.0438.452260
Pilette chiusini canaline e griglie acciaio inox sistemi di scarico - RAY INOX

Granzotto S.r.l.

Sede Operativa: Via dei Colli, 101 - 31058 SUSEGANA (TV)
Tel. +39 0438 4521 - Fax +39 0438 452200 - E-mail: info@rayinox.it
Partita IVA 02182800264

Sede Legale: Via dei Colli, 61 - 31058 SUSEGANA (TV)
Registro Imprese di TV 02182800264
Capitale Sociale Versato Euro 78.000,00 I.V.
Liquidazione: NO - Socio Unico: SI